LMX-0601G-SFP-V2
Featured Information
LMX-0601G-SFP-V2
FEATURES
- Supports 5*10/100/1000Tx Fast Ethernet ports and 1*100/1000 SFP Slot
- Network Redundancy Support: RSTP/MSTP, and G.8032 ERPS (Recovery Time <50ms)
- Configuration: Web Console, Telnet, CLI Command
- Supports IGMP v1/v2/v3, up to 1024 Groups
- Supports QoS (IEEE802.1p) and CoS/ToS
- Supports IEEE802.1Q VLAN, SNMP v1/v2c
- Redundant Power Input Design: 12~48VDC
- Reverse Polarity Protection
- IP30 Protection
- DIN-Rail or Wall Mountable
- Green : RoHS Compliant
- Housing : Metal, IP30 protection
- IGMP Group : 1024
- Input Voltage : 12~48VDC Redundant Input
- Jumbo Frame : 9.6Kbytes
- L2 Switching : Port/MAC/Protocol/IP Subnet-based VLAN, VLAN trunking, GARP/GVRP, Loop Guard, Link Aggregation static/LACP, BPDU guard, Error disable recovery, IGMPv2 snooping, MLD snooping, IGMP filtering, IPMC throttling / filtering leave proxy, DHCP snooping, ARP, MEP, G.8032 v1/v2
- L3 Switching : DHCP option82, static routes
- LED Indicators : System: Power 1, Power 2, Master, Ring, Fault Ethernet Ports: Speed/Link/Active Fixed Fiber: Link/Active
- MAC Table Size : 8K
- Protocols : IPv4/IPv6, SNMP v1/v2c/v3, LLDP, LLDP-MED, HTTP, HTTPS, SSHv2 telnet, DHCP client, DHCPv6 client, DHCP server, Port Mirror, DNS client/proxy, IP based Access Filter, ICMPv6, syslog, Time Zone / Daylight Saving, NTP client, RMON, sFlow, Loop detection, Console Port, Power Lost Warning, Relay Trigger
- Processing Type : Store and Forward
- QoS : 802.1p Queueing, Input priority mapping, Storm control for Unicast/Multicast/Broadcast, Port/Queue/ACL policer, Port egress shaper, Queue egress shaper, DiffServ (DSCP), Tag remarking, Scheduler mode
- Relay Contact : 24 VDC, 1A resistive
- Reverse Polarity Protection : Present
- RS232 Serial Console : 1*RS232 in RJ45
- Vibration : IEC60068-2-6
- Shock : IEC60068-2-27
- Storage Temperature : -40°C ~ 85°C
- System / Diagnostics : Dual Image Protection, PING, PING6
- Transfer Rate : 14,880pps for Ethernet Port 148,800pps for Fast Ethernet Port 1,488,000pps for Gig Ethernet Port
INCLUDED
- 1 - Quick Installation Guide
- 1 - LMX-0601G-SFP-V2
- 1 - Wall mounting bracket set with screws
- 1 - RJ45 to DB9 Serial Console cable
- 1 - DC cable - 18 AWG & DC jack 5.5 x 2.1mm
- 1 - RJ45 dust cover set
SPESIFICATIONS
- Ambient Relative Humidity : 5 to 95%, (non-condensing)
- Switching Architecture : Back-Plane (Switching Fabric): 12Gbps
- Certifications : FCC, CE, UL 61010-1, 61010-2-201
- Dimensions : 54 x 142 x 99 mm (W x H x D)
- EMI : FCC Part 15 Subpart B Class A CE EN55032/EN61000-6-4 Class A
- EMS : CE EN55035/EN61000-6-2 Class A IEC61000-4-2,3,4,5,6,8
- Ethernet Port : 5*10/100/1000Base-TX, auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection
- SFP Port : 1*100/1000 SFP Slot
- Flow Control : IEEE 802.3x flow control, back pressure flow control
- Free Fall : IEC60068-2-32
- Memory Buffer : 4Mbits
- Mounting : DIN-Rail mounting, Wall mounting
- Network Cable : 10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable EIA/TIA-568 100-ohm (100m) 100Base-TX: 2-pair UTP/STP Cat. 5 cable EIA/TIA-568 100-ohm (100m) 1000Base-TX: 4-pair UTP/STP Cat. 5e, 6 cable EIA/TIA-568 100-ohm (100m)
- Network Redundancy : STP/RSTP/MSTP, port trunk with LACP, ERPS v1/v2 (<50ms)
- Operating Temperature : -10°C to 70°C
- Overload Current Protection : Present
- Power Connection : 1 removable 6-contact terminal block
- System Power Consumption : 7.5W
- Power Saving : ActiPHY, PerfectReach, IEEE 802.3az EEE power management
- Priority Queues : 8
- VLAN Groups : 4095
- Warranty : 5 Years
LMX-0601G-SFP-V2
Antaira’s LMX-0601G-SFP-V2 is a 6-port industrial Gigabit managed Ethernet switch that is embedded with five gigabit Ethernet ports and one dual rate (100/1000) SFP slots for fiber connection. This switch is a fully manageable industrial Ethernet switch pre-loaded with light layer 3 network management software, and supports a user friendly web console interface for easy configuration. The LMX-0601G-SFP-V2 is IP30 rated, DIN-rail mountable, and has an operating temperature model for a standard temperature range (STD: -10°C to 70°C). It also provides high EFT and ESD protection for any industrial networking application within factory automation, ITS, power/utility, water wastewater, and any other outdoor or harsh environment. Version 2 hardware is compatible with the latest light layer 3 firmware which permits static routes between VLANs